Description
UCOPLAST- ACG is a ready to use accelerator based on modified silicates and water proofing agent in liquid from which is added to the mixing to the water prior to their addition to the cement concrete system. UCOPLAST- ACG reacts in the mix to greatly assist in hydration process which gives early high strength.
Ideally suited for guniting and shotcreting, overhead spraying which reduces dust production, great reduction in rebound loss, also helps in better adhesion to wet damp substrate.
Where to use
  • Tunnels, Underground Chambers
  • Swimming pools, Concrete repair
  • Excavation, shoring operations
  • Embankments.
  • Basement walls, floors, tanks.
 Technical Data
Form--Liquid
Colour--Colourless
Type--Inorganic Substances
CI Content--Nil
Sp. gravity--1.3-1.4 kg / ltr.

Method of use
UCOPLAST- ACG is added to the mixing water prior to their addition to the dry cement aggregate system.
Rates of set for gunite mixes are slowed down when sprayed onto acid substrates. The type and age of cement could be the influencing factors. Therefore it is advisable to carry our trial mixes by Gillmore Needle to determine the correct dosage rate.
Over Dosing
 Dosing up to 10% is having no detrimental effect. It may cause 'Flash Set'.
Storage Life
UCOPLAST - ACG has a self-life of one year in manufacturer unopened drums. Store under shed, protect from frost & direct sunlight.
Handling Precautions
UCOPLAST - ACG is an industrial chemical and ingestion should be avoided. Any Splashes to the eyes washed off with clean water and medical advice sought.

Important Note :-
All product should be used in accordance with manufactures instructions. Every effort is made to ensure that the information is reliable, we cannot accept responsibility for work carried out with our materials as we have no control over methods of application, site conditions etc.--------------------------------->Back to Product Index