Description
UCORELEASE-SPL is a mixing of mineral oil and special chemical with good shutter release
property without staining on concrete
Properties
- Suitable for use with steam cured
concrete
- Its effective on both wood & metal
shutter & mould
- Can be used safely with white cement because of non staining
property.
Formwork surfaces:
UCORELEASE-SPL may be used on Wooden or metal surfaces. Particularly effective on
resinous coated surfaces. UCORELEASE-SPL can be used safely with white cement.
UCORELEASE-SPL is an internationally used material and has an
outstanding record of performance. |
Technical Data
Form--Liquid
Colour--Pale straw
SP Gravity--0.83+0.02 at 300C
Method of use
No preparation is necessary but if extensive reuse of timber mould. It is advisable to protect all new surface with
UCORELEASE- SPL. For used mould all excess cement must be removed together with any surface deposits of previous oil.
UCORELEASE-SPL should be applied by brush sponge or mould oil sprayer. If a sprayer
is used, care should be taken to choose correct size of sprayer. Apply one thin coat on entire surface thinnest coating
necessary to achieve effective coverage. Excessive application may lead to surface dusting and uneconomical too. Wipe or brush of any excess particles on the surface and apply one coat of
UCORELEASE-SPL before to remove UCORELEASE-SPL completely for recoating mould or shutter surface. Use strong
industrial detergent together with stiff brushing then thoroughly rinse with water.
Storage Life
UCORELEASE-SPL has a storage life of one year and should be stored in manufacturers sealed
container in frost free condition out of direct sunlight.
Health & Safety
UCORELEASE-SPL is not a health hazard. Use gloves when handling. Remove splashes on the skin with soap & water avoid contact with eyes and accident contamination should be washed
thoroughly with plenty of water and seek medical treatment. |