Description 
UCOCURE - WB is a solution of special pigmented wax emulsion formulated for application to freshly - placed concrete. It dries to form impervious film on the surface. 
It ensures that the concrete Keeps as moist as possible during the vital curing period. 
Efficient curing is particularly important in exposed situations such as concrete roads and runways etc. where the surfaces are subject to the drying action of heat, direct sunlight or wind. Traditional curing methods using wet Hessian, straw, sand or polythene sheeting are never completely efficient as it is possible to exclude air entirely from the face of the concrete. These techniques waste time, labour and materials and in addition are difficult to apply to vertical surface.
UCOCURE - WB curing compound membrane replaces these older methods, by virtue of its easy application, higher efficiency and saving in labour and material costs 
Where to use 
For efficient and positive curing of canal lining, roads, runways, external floors, bridges, column and beams, dams other types of concrete construction 
Where water curing difficult or unreliable. 		 Technical Data 
Form--White Liquid
Sp. gravity--0.98
dry film--translucent
application temp--min 50C 
Method of Use 
UCOCURE - WB should be applied at the rate of 1 litre to 5.5 m2 of surface area, a single spray-applied coat is sufficient. For horizontal surfaces spray on UCOCURE - WB as soon as any excess water has dried off. This is usually within 30 minutes of finishing vertical surface should be wetted with water after stripping the shuttering and just prior to the application of UCOCURE-WB. 
Storage Life 
UCOCURE - WB has a shelf life of at least 12 months in unopened drums, protect from direct sunlight. 
Handling Precaution 
UCOCURE - WB is water based non-hazardous, non-toxic. Avoid contact with skin and eyes.

Important Note :-
All product should be used in accordance with manufactures instructions. Every effort is made to ensure that the information is reliable, we cannot accept responsibility for work carried out with our materials as we have no control over methods of application, site conditions etc.--------------------------------->Back to Product Index