Description
UCOGROUT-EP is a three component solvent- free prepacked ready to use high strength
nonshrink pourable filled grouting system. UCOGROUT-EP has the better flow properties at lower temperatures, this improved fluidity together with its longer usable life enable it to be placed in awkward and inaccessible gaps.
UCOGROUT-EP is supplied as the resin hardener and filler. The grout has a creamy
consistency and his readily powered or trowelled when mixed.
UCOGROUT-EP has excellent bonding property with steel and concrete it has negligible shrinkness and
UCOGROUT-EP is excellent chemical and weathering resistance.
Strength Results
| Ultimate Strength |
N/mm2 |
| at 30°C |
|
| Compressive |
100 |
| Tensile |
15 |
| Flexural |
40 |
Where to use
- Machine based plates and crane-rail
grouting.
- Fixing bolts and anchors
- joining concrete to concrete and
concrete to steel
- Anchoring to steel reinforcements, girders and
post-tensioned cables in concrete and stone.
|
Technical Data
Form--Liquid and Powder
Colour--Light brown
Density--Approx 108 kg /ltr
Pot life--30 mins at 27°C
Viscosity--135 poise at 15°C
Application Temp--10°C to 45°C
Method of use
- Surface Application: Surface should be sound, free from any
contaminations, resistance, oil and grease.
- As supplied the grout consists of 3
components, the hardener should be added to the resin and the two components
thoroughly mixed preferable with mechanical means until a uniform liquid
is obtained then add filler and continue mixing until homogeneous flowing mortar achieved. No surface priming is
necessary the
material should be allowed to stand for 5 mins. Prior to use to allow deaeration to occur for large volume apply in more than on layer.
Storage Life
UCOGROUT-EP may be stored for 12 months in manufacturer's unopened, sealed containers in dry condition above 10°C and out of direct sunlight.
Handling precautions
Cleanliness in handling epoxy resins is essential to prevent skin irritation wear goggles use gloves. |